Q-Logic 5602 manual Copy a Group, Add Members to a Group

A

9 – Device Security Configuration Managing Groups

9.6.4

Copy a Group

Enter the Group Copy command to copy the contents of an existing group (group_port) to a new group (port_1) as shown in the following example:

SANbox (admin-security) #> group copy group_port port_1

9.6.5

Add Members to a Group

Adding a member to a group involves specifying a group, the member worldwide name, and the member attributes. The member attributes define the authentication method, encryption method, secrets, and fabric binding, depending on the group type.

„For ISL member attributes, refer to Table 13-1.

„For Port member attributes, refer to Table 13-2.

„For MS member attributes, refer to Table 13-3.

Enter the Group Add command to add a member to a group:

SANbox (admin-security) #> group add group_1
A list of attributes		with formatting and default	values will follow
Enter a new value or		simply press the ENTER key to accept the current value
with exception of the Group Member WWN field which is mandatory.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and		the ENTER key to do so.
Group Name	group_1
Group Type	ISL
Member	(WWN)	[00:00:00:00:00:00:00:00] 10:00:00:c0:dd:00:90:a3
Authentication	(None / Chap)		[None	]chap
PrimaryHash	(MD5	/ SHA-1)	[MD5	]
PrimarySecret	(32 hex or 16 ASCII char value)		[	]0123456789abcdef
SecondaryHash	(MD5	/ SHA-1 / None)	[None	]
SecondarySecret	(40 hex or 20 ASCII char value)		[	]
Binding	(domain ID 1-239, 0=None)		[0	]
Finished configuring		attributes.
To discard this	configuration use the security cancel command.

59183-01 A 9-13