Q-Logic 5602 manual 59183-01 a 13-89

A

13 – Command Reference Set Setup Services

Table 13-21. Switch Services Settings (Continued)

Entry	Description
MgmtServerEnabled	Enables (True) or disables (False) the management of the
	switch through third-party applications that use GS-3 Man-
	agement Server (MS). This parameter is the master control
	for the Set Config Port command parameter, MSEnable.
	The default is True.

Examples The following is an example of the Set Setup Services command:

SANbox #> admin start
SANbox (admin) #> set	setup	services
A list of attributes with		formatting			and current values will follow.
Enter a new value or simply			press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key				to do so.
PLEASE NOTE:
-----------
* Further configuration may			be required after enabling a service.
* If services are disabled,			the connection to the switch may be lost.
* When enabling SSL, please			verify	that the date/time settings
on this switch and the workstation					from where the SSL connection
will be started match, and then a new certificate may need to be
created to ensure	a secure connection to this switch.
TelnetEnabled	(True	/	False)		[True ]
SSHEnabled	(True	/	False)		[False]
GUIMgmtEnabled	(True	/	False)		[True ]
SSLEnabled	(True	/	False)		[False]
EmbeddedGUIEnabled	(True	/	False)		[True ]
SNMPEnabled	(True	/	False)		[True ]
NTPEnabled	(True	/	False)		[False]
CIMEnabled	(True	/	False)		[False]
FTPEnabled	(True	/	False)		[True ]
MgmtServerEnabled	(True	/	False)		[True ]

Do you want to save and activate this services setup? (y/n): [n]

59183-01 A 13-89