Soehnle F5 manual Installation

GB

Installation

1.Place the scales level and on a firm surface for all measurements.

Danger! Risk of slipping if surface is wet.

2.The operator terminal may optionally be held in the hand, placed on a table, remain on the scales or be hung on the wall. When fixing the magnetic wall brak- ket to a solid, smooth, dry and dust- and grease-free base it is sufficient for you to put the wall bracket into the oval slot on the back of the operator terminal. Then remove the tape over the adhesive patch and press the operator terminal to the fixing position horizontally at eye level.

3.With tiles or a rough surface, no guarantee can be given of the length of life of the adhesion. You should therefore screw the wall bracket in place.

To do this remove the cover from the mag- netic wall bracket by inserting a fingernail or a knifepoint under the slot and levering off the cover.

Then drill 2 holes in the wall at a distance of 2 cm horizontally from each other. The drill size is dependent on whether you need to use wall plugs. Then screw in and press cover back in. Put the operator termi- nal on the magnetic bracket.

1.

2.

2.

3.

3.
2x	2x

21