Soehnle F5 manual Data input

GB

4.

1.

2.

3.

4.

5.

4.Option to change country-specific settings between kg/cm and lb/in or st/in. Depending on the choice of unit of weight, you can switch back to the clock mode

with the key.

The operator terminal and the scales are in radio contact.

Radio-aided computer components, HIFI components or radio-control-led toys may cause an operational error (see error mes- sages).

Data input

To use the Soehnle Body Balance correctly, the personal data for each person need to be input into the operator terminal and you should then immediately step on the scales barefoot.

If weight is placed on the scales during input, then they immediately switch – as long as there is radio contact between the operator terminal and the scales – to the weighing and analysis mode and they cannot be used again until the scales have switched back to the clock mode (20 sec. after the weight is remo- ved from the scales).

1.Start data input ( ) and confirm ( ). If anyone’s data is already stored, you must select the “NEW” display with the ▼/▲ keys and confirm with ( ).

2.Select memory (P1 ... P8)

(▼ = down, ▲ = up) and confirm ( ).

3.Input height (▼ = down, ▲ = up) and confirm ( ).

4.Input age (▼ = down, ▲ = up) and confirm ( ).

5.Select sex (▼ = male, ▲ = female) and confirm ( ).

22