Using a “Memory Stick”
–Introduction
Image quality mode indicator
The image quality mode indicator is not displayed during playback.
When you select image quality
The number of images you can shoot in the currently selected image quality appears on the screen.
Använda “Memory Stick”
–Introduktion
Indikator för bildkvalitetsläge
Indikatorn för bildkvalitetsläge visas inte under uppspelning.
När du väljer bildkvalitet
Antal bilder du kan ta i det aktuella bildkvalitetsläget visas på skärmen.
Still images:
You can select either of two image sizes.
1152 ⋅ 864 or 640 ⋅ 480 (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640
⋅480.)
The default setting is 1152 ⋅ 864.
640 ⋅ 480 only
Moving pictures: You can select either of two picture sizes.
320 ⋅ 240 or 160 ⋅ 112 The default setting is 320 ⋅ 240.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press MENU, then select STILL SET (still image) or MOVIE SET (moving picture) in with the SEL/PUSH EXEC dial (p. 237).
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the dial.
The indicator changes as follows:
Still images*: |
|
|
|
|
|
| |
1152 | 640 | ||||||
| |||||||
Moving pictures: |
|
|
|
|
|
| |
320 | 160 | ||||||
|
*
Stillbilder:
Du kan välja mellan två bildstorlekar.
1152 ⋅ 864 eller 640 ⋅ 480 (När
Rörliga bilder: Du kan välja mellan två bildstorlekar.
320 ⋅ 240 eller 160 ⋅ 112 Ursprunglig inställning är 320 ⋅ 240.
(1) Ställ
(2) Tryck på MENU och välj sedan STILL SET (stillbild) eller MOVIE SET (rörliga bilder)
under med SEL/PUSH
(3) Välj IMAGESIZE genom att vrida SEL/PUSH
(4) Välj önskad bildstorlek genom att vrida SEL/ PUSH
Stillbilder*: |
|
|
|
|
|
| |
1152 | 640 | ||||||
| |||||||
Rörliga bilder: |
|
|
|
|
|
| |
320 | 160 | ||||||
|
* Endast
146