Recording a picture |
| Spela in bilder |
|
|
|
|
|
|
Notes
•Fasten the grip strap firmly.
•The recording data (date/time or various settings when recorded) are not displayed while recording. However, they are recorded automatically onto tape. To display the recording data, press DATA CODE on the Remote Commander during playback (p. 52).
Note on recording mode
Your camcorder records and plays back in the SP (standard play) mode and in the LP (long play) mode. Select SP or LP in the menu settings
(p. 240). In the LP mode, you can record 1.5 times as long as in the SP mode.
When you record a tape in the LP mode on your camcorder, we recommend playing back the tape on your camcorder.
Note on the LOCK switch (except
When you slide the LOCK switch to the right, the POWER switch can no longer be set to MEMORY accidentally. LOCK switch is set to the left as the default setting.
To enable smooth transition
Transition between the last scene you recorded and the next scene is smooth as long as you do not eject the cassette even if you turn off your camcorder.
However, check the following:
–Do not mix recordings in the SP mode and in the LP mode on one tape.
–When you change the battery pack, set the POWER switch to OFF (CHG).
–When you use a cassette with cassette memory, however, you can make the transition smooth even after ejecting the cassette if you use the END SEARCH function (p. 48).
Obs!
•Se till att greppremmen sitter fast ordentligt.
•Inspelningsinformation (datum/tid och olika inspelningsinställningar) visas inte medan du spelar in. De spelas däremot automatiskt in på bandet. Vill du visa den inspelade informationen trycker du på DATA CODE på fjärrkontrollen när du spelar upp bandet (sid. 52).
Om inspelningsläget
Videokameran kan både spela in och spela upp i
När du spelat in ett band i
Om
När du skjuter
Hur du får mjuka övergångar
Övergången mellan det sist inpelade avsnittet och nästa avsnitt sker mjukt så länge som du inte tar ur kassetten. Detta gäller även om du slagit av videokameran.
Du bör ändå tänka på följande:
–Blanda inte inspelningar gjorda i
–När du byter batteri ställer du först POWER- omkopplaren i läget OFF (CHG).
–Om du använder kassetter med kassettminne och använder funktionen END SEARCH (sid. 48), kan övergången göras mjuk även om du har tagit ut kassetten.
36