Recording a picture

 

Spela in bilder

 

 

 

Note on digital zoom

The picture quality deteriorates as you move the power zoom lever towards the “T” side.

When the POWER switch is set to MEMORY (except DCR-TRV16E/TRV116E)

You cannot use the digital zoom.

Shooting with the Mirror Mode

This feature allows the camera subject to view him-or herself on the LCD screen.

The subject uses this feature to check his or her own image on the LCD screen while you look at the subject in the viewfinder.

Set the POWER switch to CAMERA or MEMORY (except DCR-TRV16E/TRV116E).

Rotate the LCD screen 180 degrees.

The indicator appears in the viewfinder and on the LCD screen.

Xzappears in the standby mode, and z appears in the recording mode. Some of other indicators appear mirror-reversed and others are not displayed.

Picture in the mirror mode

The picture on the LCD screen is a mirror-image. However, the picture will be normal when recorded.

During recording in the mirror mode ZERO SET MEMORY on the Remote Commander does not work.

Om digital zoomning

Bildkvaliteten försämras i och med att du flyttar spaken för powerzoom mot “T”-sidan.

När POWER-omkopplaren är ställd på MEMORY (gäller ej DCR-TRV16E/TRV116E) Du kan inte använda digital zoomning.

Filma med spegellägetaktiverat

Med den här funktionen kan den du filmar se sig själv på LCD-skärmen.

Den du filmar ser bilden av sig själv medan du ser motivet i sökaren.

Ställ POWER-omkopplaren på CAMERA eller MEMORY (gäller ej DCR-TRV16E/TRV116E).

Vrid LCD-skärmen 180 grader.

Indikatorn visas i sökaren och på LCD- skärmen.

Xzvisas i standbyläget och zvisas i inspelningsläget. Vissa av de andra indikatorerna visas spegelvända medan andra inte visas alls.

Bilder i spegelläget

Bilden i LCD-skärmen visas som en spegelbild. Den inspelade bilden blir däremot som vanligt.

Under inspelning i spegelläge

Du kan inte använda ZERO SET MEMORY på fjärrkontrollen.

Grunderna – Inspelning Basics – Recording

41