
Step 1 Preparing the power supply
Connecting to a wall socketWhen you use your camcorder for a long time, we recommend that you power it from a wall socket using the AC power adaptor.
(1) Open the DC IN jack cover. Connect the AC power adaptor supplied with your camcorder to the DC IN jack on your camcorder with the plug’s vmark facing up.
(2) Connect the mains lead to the AC power adaptor.
(3) Connect the mains lead to a wall socket.
Steg 1 Förbereda strömförsörjningen
Ansluta till ett vägguttagNär du använder videokameran under en längre tid rekommenderas du att driva kameran med nätspänning via
(1) Öppna skyddslocket till DC
(2) Anslut nätkabeln till
(3) Anslut nätkabeln till ett vägguttag.
1 | 2, 3 |
PRECAUTION
The set is not disconnected from the AC power supply (wall socket) as long as it is connected to the wall socket, even if the set itself has been turned off.
Notes
•The AC power adaptor can supply power even if the battery pack is attached to your camcorder.
•The DC IN jack has “source priority.” This means that the battery pack cannot supply any power if the AC power adaptor is connected to the DC IN jack, even when the mains lead is not plugged into a wall socket.
Using a car battery
Use a Sony Car Battery Adaptor (optional). Refer to the operating instructions of the Car Battery Adaptor for further information.
SE UPP!
Tänk på att videokameran inte är bortkopplad från
Obs!
•
ström även när batteriet sitter i videokameran.
•DC
Använda bilbatteri
Använd Sonys bilbatteriadapter (tillval). Mer information finns i bruksanvisningen till bilbatteriadaptern.
30