Types of trouble and how to correct trouble
In the recording and playback modesSymptom | Cause and/or Corrective Actions |
The power does not turn on. | • The battery pack is not installed, or is dead or nearly dead. |
| c Install a charged battery pack. (p. 24, 25) |
| • The AC power adaptor is not connected to a wall socket. |
| c Connect the AC power adaptor to a wall socket. (p. 30) |
The end search function does not | • The tape was ejected after recording when using a cassette |
work. | without cassette memory. (p. 49) |
| • You have not recorded on the new cassette yet. (p. 48) |
The end search function does not | • The tape has a blank portion at the beginning or midway. |
work correctly. | (p. 49) |
The battery pack is quickly | • The operating temperature is too low. |
discharged. | • The battery pack is not fully charged. |
| c Charge the battery pack fully again. (p. 25) |
| • The battery pack is completely dead, and cannot be recharged. |
| c Replace with a new battery pack. (p. 24) |
The battery remaining time indicator • You have used the battery pack in an extremely hot or cold
does not indicate the correct time. | environment for a long time. |
| • The battery pack is completely dead, and cannot be recharged. |
| c Replace with a new battery pack. (p. 24) |
| • The battery is not fully charged. |
| c Charge the battery pack fully again. (p. 25) |
| • A deviation has occured in the remaining battery time. |
| c Charge the battery pack fully again so that the indication on |
| the battery remaining battery time indicator is correct. (p. 25) |
The power goes off although the | • A deviation has occured in the remaining battery time. |
battery remaining time indicator | c Charge the battery pack fully again so that the indication on |
indicates that the battery pack has | the battery remaining battery time indicator is correct. (p. 25) |
enough power to operate. |
|
The cassette cannot be removed from | • The power supply is disconnected. |
the holder. | c Connect it firmly. (p. 24, 30) |
| • The battery is dead. |
| c Use a charged battery pack. (p. 24, 25) |
The % and Zindicators flash and no • Moisture condensation has occurred. | |
functions except for cassette ejection | c Remove the cassette and leave your camcorder for at least |
work. | one hour to acclimatise. (p. 281) |
indicator does not appear when | • The |
using a cassette with cassette | c Clean the |
memory. |
|
|
|
Remaining tape indicator is not | • The q REMAIN is set to AUTO in the menu settings. |
displayed. | c Set it to ON to always display the remaining tape indicator. |
| (p. 240) |
(continued on the following page)
kningöFels Troubleshooting
255