Chapter 10
Protocol (FoIP). You probably use a FoIP service (provided by your telephone company) if you:
•Dial a special access code along with the fax number, or
•Have an IP converter box that connects to the Internet and provides analog phone ports for the fax connection.
NOTE: You can only send and receive faxes by connecting a phone cord to the 1- LINE port on the back of the HP
The FoIP service might not work properly when the HP
You should also check with your telephone company to make sure their Internet phone service supports faxing. If they do not support faxing, you might encounter intermittent problems when trying to send and receive faxes through the Internet.
Related topics
Set the fax speed
Print reports
You can set up the HP
By default, the HP
This section contains the following topics:
•Print fax confirmation reports
•Print fax error reports
•Print the fax log
•Print other reports
Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.
The default fax confirmation setting is Off. This means that the HP
100 Use the fax features