3.Dry the glass with a dry, soft,
4.Turn on the HP
To clean the lid backing
1.Turn off the HP
NOTE: Depending how long the HP
2.Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.
3.Dry the backing with a dry, soft,
CAUTION: Do not use
4.If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol.
CAUTION: Be careful not to spill alcohol on the glass or exterior of the HP All-
The image is cropped when I make a borderless copy
Cause: The HP
Solution: If you want to enlarge a photo to fit a
To set a custom size from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.In the Copy area, press the Reduce/Enlarge button.
4.Press until Custom 100% appears.
5.Press OK.
6.Press or use the keypad to enter a percentage to reduce or enlarge the copy. (The minimum and maximum percentage to resize a copy varies by model.)
7.Press Start Copy Black or Start Copy Color.
Copy troubleshooting | 231 |