Chapter 14
To remove print cartridges before shipment
1.Turn on the HP
2.Open the print cartridge door.
3.Remove the print cartridges from their slots.
NOTE: If the HP
4.Place the print cartridges in an airtight plastic container so they will not dry out, and put them aside. Do not send them with the HP
5.Close the print cartridge door and wait a few minutes for the print carriage to move back to its home position (on the left side).
NOTE: Make sure the scanner is idle and has returned to its parked position before turning off the HP
6.Press the Power button to turn off the HP
Remove the control panel faceplate
Complete the following steps once you have removed the print cartridges.
NOTE: This information does not apply to customers in Japan. For information on service options in Japan, see HP Quick Exchange Service (Japan).
CAUTION: The HP
CAUTION: The replacement HP
To remove the control panel faceplate
1.Press the Power button to turn off the HP
2.Unplug the power cord, and then disconnect it from the HP
3.Lift the ADF lid.
4.Remove the control panel faceplate as follows:
a. Place your hands on each side of the control panel faceplate.
b. Use your fingertip or insert a thin object in the tab on the upper right corner of the faceplate to pry the control panel faceplate off.
262 HP warranty and support