The HP
To test your fax setup from the control panel
1.Set up the HP
2.Insert the print cartridges and load
3.Press Setup.
4.Press 6, then press 6 again.
This selects the Tools menu and then selects Run Fax Test.
The HP
5.Review the report.
•If the test passes and you are still having problems faxing, check the fax settings listed in the report to verify the settings are correct. A blank or incorrect fax setting can cause problems faxing.
•If the test fails, review the report for more information on how to fix any problems found.
6.After you pick up the fax report from the HP
Cause: The HP
Solution: Look at the display on the HP
Cause: The wrong phone cord is used to connect the HP
Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a
Make sure you used the phone cord supplied in the box with the HP
Fax troubleshooting | 171 |