Chapter 8
Set the number of copies
You can set the number of copies that you want to print by using the Number of Copies option.
To set the number of copies from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.In the Copy area, press Menu repeatedly until Number of Copies appears.
4.Press or use the keypad to enter the number of copies, up to the maximum. (The maximum number of copies varies by model.)
TIP: If you hold down either of the arrow buttons, the number of copies changes by increments of 5 to make it easier to set a large number of copies.
5.Press Start Copy Black or Start Copy Color.
Set the copy paper size
You can set the paper size on the HP
To set the paper size from the control panel
1.In the Copy area, press Menu repeatedly until Copy Paper Size appears.
2.Press until the appropriate paper size appears.
3.Press Start Copy Black or Start Copy Color.
Set the copy paper type
You can set the paper type on the HP
To set the paper type for copies
1.In the Copy area, press Menu repeatedly until Paper Type appears.
2.Press until the appropriate paper type appears.
3.Press Start Copy Black or Start Copy Color.
Refer to the following table to determine which paper type setting to choose based on the paper loaded in the input tray.
Paper type | Control panel setting |
|
|
Copier paper or letterhead | Plain Paper |
|
|
HP Bright White Paper | Plain Paper |
|
|
HP Premium Plus Photo Paper, Glossy | Premium Photo |
|
|
74 Use the copy features