Copy troubleshooting
Use this section to solve these copy problems:
•Copies are too light or too dark
•Nothing happens when I try to copy
•Parts of the original do not appear or are cut off
•Fit to Page is not working as expected
•The printout is blank
•A borderless copy has white space around the edges
•The image is cropped when I make a borderless copy
Copies are too light or too dark
Cause: The Lighter / Darker setting for the HP
Solution: Adjust the lightness and darkness of the copies.
To adjust the copy contrast from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.In the Copy area, press Menu repeatedly until Lighter / Darker appears.
4.Do one of the following:
•Press to darken the copy.
•Press to lighten the copy.
5.Press Start Copy Black or Start Copy Color.
Cause: Try using Enhancements improve an overexposed image.
Solution:
To copy an overexposed photo
1.Make sure you have paper loaded in the input tray.
2.Load your original photo print side down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass.
3.In the Copy area, press Menu repeatedly until Enhancements appears.
4.Press until the Photo enhancement setting appears.
5.Press Start Copy Color.
Nothing happens when I try to copy
Cause: The HP
Solution: Look on the HP
Copy troubleshooting | 223 |