Chapter 4
•If your computer has two phone ports, set up the HP
Figure 4-13 Back view of the HP All-in-One
1Telephone wall jack
2"IN" phone port on your computer
3"OUT" phone port on your computer
4Telephone
5Computer with modem
6Use the phone cord supplied in the box with the HP
To set up the HP
1.Remove the white plug from the port labeled
2.Find the phone cord that connects from the back of your computer (your computer
3.Connect a phone to the "OUT" port on the back of your computer
4.Using the phone cord supplied in the box with the HP
NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP
5.If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the HP
6.Turn off the Auto Answer setting.
7.Run a fax test.
You must be available to respond in person to incoming fax calls, or the HP
44 Finish setting up the HP