Chapter 12
Solution: Set the Fax Speed to Medium or Slow, and then contact the sender to have them resend the fax.
To set the fax speed from the control panel
1.Press Setup.
2.Press 5, and then press 7.
This selects Advanced Fax Setup and then selects Fax Speed.
3.Press to select one of the following settings, and then press OK.
Fax speed setting
Fast
Medium
Slow
Fax speed
v.34 (33600 baud)
v.17 (14400 baud)
v.29 (9600 baud)
Cause: There is an error message or other prompt on the display.
Solution: Check the display for an error message or prompt providing information about the problem and how to solve it. If there is an error message or prompt on the display, the HP
If the HP
For more information about other errors, see Errors.
Fax tones are recorded on my answering machine
Cause: The answering machine is not set up properly with the HP
Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a
194 Troubleshooting