To send a fax using monitor dialing from the control panel
1.Load your originals print side up into the document feeder tray. If you are sending a
NOTE: If you are sending a
2.Press Start Fax Black or Start Fax Color.
•If the device detects an original loaded in the automatic document feeder, you will hear a dial tone.
•If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded on the glass, and then press 1 to select Yes.
3.Once you hear the dial tone, enter the number by using the keypad on the control panel.
4.Follow any prompts that might occur.
TIP: If you are using a calling card to send a fax and you have your calling card PIN stored as a speed dial, when prompted to enter your PIN, press Speed Dial or a
Your fax is sent when the receiving fax machine answers.
Related topics
•Adjust the volume
•Set up speed dialing
Send a fax from memory
You can scan a
To send a fax from memory
1.Load your originals print side up into the document feeder tray.
NOTE: This feature is not supported if you load your originals on the glass. You must load your originals in the document feeder tray.
2.In the Fax area, press Menu.
The Enter Number prompt appears.
3.Enter the fax number by using the keypad, press Speed Dial or a
4.In the Fax area, press Menu repeatedly until How to Fax appears.
Send a fax | 87 |