Chapter 10
NOTE: If you need printed confirmation that your faxes were successfully sent, enable fax confirmation before sending any faxes.
TIP: You can also send a fax manually by dialing from a phone or by using the monitor dialing feature from the control panel. These features allow you to control the pace of your dialing. They are also useful when you want to use a calling card to charge the call and you need to respond to tone prompts while dialing.
To send a basic fax from the control panel
1.Load your originals print side up into the document feeder tray. If you are sending a
NOTE: If you are sending a
2.Enter the fax number by using the keypad, press Speed Dial or a
TIP: To add a pause in the fax number you are entering, press Redial/Pause, or press the Symbols (*) button repeatedly, until a dash
3.Press Start Fax Black.
•If the device detects an original loaded in the automatic document feeder, the HP
•If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded print side down on the glass, and then press 1 to select Yes.
TIP: If the recipient reports issues with the quality of the fax you sent, you can try changing the resolution or contrast of your fax.
Related topics
•Send a fax manually from a phone
•Send a fax using monitor dialing
•Change the fax resolution and Lighter / Darker settings
•Print fax confirmation reports
•Send a color original or photo fax
Send a fax using speed dials
You can quickly send a
Speed dial entries will not appear until you have set them up.
84 Use the fax features