Chapter 4
Case D: Fax with a distinctive ring service on the same line
If you subscribe to a distinctive ring service (through your telephone company) that allows you to have multiple phone numbers on one phone line, each with a different ring pattern, set up the HP
Figure 4-3 Back view of the HP All-in-One
1Telephone wall jack
2Use the phone cord supplied in the box with the HP
To set up the HP All-in-One with a distinctive ring service
1.Using the phone cord supplied in the box with the HP
NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP
2.Turn on the Auto Answer setting.
3.Change the Distinctive Ring setting to match the pattern that the telephone company assigned to your fax number.
NOTE: By default, the HP
4.(Optional) Change the Rings to Answer setting to the lowest setting (two rings).
5.Run a fax test.
The HP
32 Finish setting up the HP