For more information on print cartridges, see Print cartridge troubleshooting.
Cause: The sender incorrectly loaded the originals in the sending fax machine.
Solution: Check with the sender to see if they correctly loaded the originals in the sending fax machine or accidentally sent a blank page.
Cause: The HP
Solution: If the HP
Cause: The paper loaded in the input tray is not suitable for your fax.
Solution: If the paper you are using is too fibrous, the ink applied by the HP
Ink is overspraying the paper when I copy or print a photo
Cause: A small amount (a few millimeters) of overspray is common when making a copy of a photo. If there are more than a few millimeters of overspray, it might mean the HP
TIP: One way to tell if ink is overspraying the paper is to check the back side of pages you print after running a copy or print job. If the back side of the page has ink streaks, the HP
Solution: Check the paper size setting. Set the paper size to match the paper loaded in the input tray.
To set the paper size from the control panel
1.In the Copy area, press Menu repeatedly until Copy Paper Size appears.
2.Press until the appropriate paper size appears.
3.Press Start Copy Black or Start Copy Color.
Paper is not picked up from the input tray
Cause: There is not enough paper in the input tray.
Solution: If the HP
Print quality troubleshooting | 147 |