Chapter 12
To resize a document from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.In the Copy area, press the Reduce/Enlarge button.
4.Do one of the following:
•If you loaded your original in the document feeder tray or on the glass, press until Full Page 91% appears.
•If you loaded a full- or
5.Press Start Copy Black or Start Copy Color.
Cause: The original is larger than the paper in the input tray.
Solution: If your original is larger than the paper in the input tray, use the Fit to Page feature to reduce your original to fit on the paper in the input tray.
To resize a document from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.In the Copy area, press the Reduce/Enlarge button.
4.Do one of the following:
•If you loaded your original in the document feeder tray or on the glass, press until Full Page 91% appears.
•If you loaded a full- or
5.Press Start Copy Black or Start Copy Color.
Scan troubleshooting
Use this section to solve these scan problems:
•Scan halts
•Scan fails
•Scan fails because of insufficient computer memory
•Scan To menu does not appear
•Scan To menu does not appear
•Scanned image is blank
•Scanned image is incorrectly cropped
•Scanned image has incorrect page layout
232 Troubleshooting