11 Maintain the HP All-in-One
The HP
This section contains the following topics:
•Clean the HP
•Check the estimated ink levels
•Print a
•Work with print cartridges
Clean the HP All-in-One
To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP
This section contains the following topics:
•Clean the glass
•Clean the lid backing
•Clean the exterior
•Clean the automatic document feeder
Clean the glass
Glass that is dirty from fingerprints, smudges, hair, and dust on the main glass surface slows down performance and affects the accuracy of features such as Fit to Page.
In addition to the main glass surface, you might also need to clean the small glass strip inside the automatic document feeder. Streaks can occur if the glass strip inside the automatic document feeder is dirty.
To clean the glass
1.Turn off the HP
2.Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device.
3.Dry the glass with a dry, soft,
4.Turn on the HP
Clean the lid backing
Minor debris can accumulate on the white document backing located underneath the lid of the HP
Maintain the HP | 105 |