To enable fax confirmation from the control panel
1.Press Setup.
2.Press 2, and then press 3.
This selects Print Report and then selects Fax Confirmation.
3.Press to select one of the following, and then press OK.
Off
On Fax Send
On Fax Receive
Send & Receive
Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting.
Prints a fax confirmation report for every fax you send.
Prints a fax confirmation report for every fax you receive.
Prints a fax confirmation report for every fax you send and receive.
TIP: If you choose On Fax Send or Send & Receive, and scan your fax to send from memory, you can include an image of the first page of the fax on the Fax Sent Confirmation report. Press Setup, press 2, and then press 2 again. Select On from the Image on Fax Send Report menu.
Print fax error reports
You can configure the HP
To set the HP
1.Press Setup.
2.Press 2, and then press 3.
This selects Print Report and then selects Fax Error Report.
3.Press to select one of the following, and then press OK.
Send & Receive | Prints whenever there is any kind of fax error. This is the default setting. |
|
|
Off | Does not print any fax error reports. |
|
|
On Fax Send | Prints whenever there is a transmission error. |
|
|
On Fax Receive | Prints whenever there is a receiving error. |
|
|
Print the fax log
The fax log enables you to print a log of approximately the last 30 fax transactions. If a fax transaction had an error, the error is indicated by an error code in the fax log.
If necessary (for security purposes, for example), you can easily clear the entire log from memory. This also deletes any saved faxes from memory.
To print the fax log from the control panel
1.Press Setup.
2.Press 2, and then press 6.
This selects Print Report and then prints the fax log.
Print reports | 101 |