Chapter 4
Figure 4-2 Back view of the HP All-in-One
1Telephone wall jack
2DSL filter and cord supplied by your DSL provider
3Use the phone cord supplied in the box with the HP
To set up the HP All-in-One with DSL
1.Obtain a DSL filter from your DSL provider.
2.Using the phone cord supplied in the box with the HP
NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP
3.Connect the DSL filter cord to the telephone wall jack.
NOTE: If you have other office equipment or services attached to this phone line, such as a distinctive ring service, answering machine, or voice mail, see the appropriate section in this section for additional setup guidelines.
4.Run a fax test.
30 Finish setting up the HP