Solution: If you have a special ring pattern for your fax phone number (using a distinctive ring service through your telephone company), make sure that the Distinctive Ring feature on the HP
NOTE: The HP
If you are not using a distinctive ring service, check to make sure that the Distinctive Ring feature on the HP
To change the distinctive ring pattern from the control panel
1.Verify that the HP
2.Press Setup.
3.Press 5, and then press 1.
This selects Advanced Fax Setup and then selects Distinctive Ring.
4.Press to select an option, and then press OK.
When the phone rings with the ring pattern assigned to your fax line, the HP All-
Cause: The Distinctive Ring feature is not set to All Rings (and you are not using a distinctive ring service).
Solution: If you are not using a distinctive ring service, check to make sure that the Distinctive Ring feature on the HP
Cause: The memory of the HP
Solution: If the memory becomes full of faxes that have not yet been printed, the HP
•The HP
•There is no paper loaded in the input tray.
•There is a paper jam.
Fax troubleshooting | 197 |