When you have an answering machine on the same phone line you use for fax calls, you must connect the answering machine directly to the HP
1Telephone wall jack
2Connect to the IN port on the answering machine
3Connect to the OUT port on the answering machine
4Telephone (optional)
5Answering machine
6Use the phone cord supplied in the box with the HP
Make sure the HP
Set your answering machine to a low number of rings and the HP
To set the answer mode
1.Press Setup.
2.Press 4, and then press 2.
This selects Basic Fax Setup and then selects Rings to Answer.
3.Enter the appropriate number of rings by using the keypad, or press or to change the number of rings.
4.Press OK to accept the setting.
Fax troubleshooting | 195 |