(continued)
Paper type | Control panel setting |
|
|
HP Premium Plus Photo Paper, Matte | Premium Photo |
|
|
HP Premium Plus 10 x 15 cm (4 x 6 inch) Photo Paper | Premium Photo |
|
|
HP Premium or Premium Plus Inkjet Transparency Film | Transparency |
|
|
Other transparency film | Transparency |
|
|
Plain Hagaki | Plain Paper |
|
|
Glossy Hagaki | Premium photo |
|
|
L (Japan only) | Premium Photo |
|
|
Change copy speed or quality
The HP
•Best produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies slower than the other quality settings.
•Normal delivers
•Fast copies faster than the Normal setting. The text is comparable to the quality of the Normal setting, but the graphics might be lower quality. The Fast setting uses less ink and extends the life of your print cartridges.
To change the copy quality
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.In the Copy area, press Quality until the appropriate quality setting is lit.
4.Press Start Copy Black or Start Copy Color.
Change default copy settings
When you change copy settings from the control panel, the settings apply only to the current copy job. To apply copy settings to all future copy jobs, you can save the settings as defaults.
To set default copy settings from the control panel
1.Make any needed changes to the Copy settings.
2.In the Copy area, press Menu repeatedly until Set New Defaults appears.
3.Press until Yes appears.
Change copy speed or quality | 75 |