Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a
To send a fax manually, the telephone must be connected directly to the port labeled
1Telephone wall jack
2Use the phone cord supplied in the box with the HP
3Telephone
Cause: The Fax Speed setting might be set too fast.
Solution: Try setting the Fax Speed to Medium or Slow, and then resend the fax.
To set the fax speed from the control panel
1.Press Setup.
2.Press 5, and then press 7.
This selects Advanced Fax Setup and then selects Fax Speed.
3.Press to select one of the following settings, and then press OK.
Fax speed setting
Fast
Medium
Slow
Fax speed
v.34 (33600 baud)
v.17 (14400 baud)
v.29 (9600 baud)
Cause: The HP
Fax troubleshooting | 179 |