Chapter 10
To send a color original or photo fax from the control panel
1.Load your originals print side up into the document feeder tray. If you are sending a
NOTE: If you are sending a
TIP: To center a 10 x 15 cm (4 x 6 inch) photo, place the photo on the center of a blank letter- or
2.In the Fax area, press Menu.
The Enter Number prompt appears.
3.Enter the fax number by using the keypad, press Speed Dial or a
4.Press Start Fax Color.
•If the device detects an original loaded in the automatic document feeder, the HP
•If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded on the glass, and then press 1 to select Yes.
NOTE: If the recipient's fax machine only supports
Change the fax resolution and Lighter / Darker settings
You can change the Resolution and Lighter / Darker settings for documents that you are faxing.
NOTE: These settings do not affect copy settings. Copy resolution and lightness/ darkness are set independently from fax resolution and lightness/darkness. Also, the settings that you change from the control panel do not affect faxes you send from your computer.
This section contains the following topics:
•Change the fax resolution
•Change the Lighter / Darker setting
•Set new default settings
Change the fax resolution
The Resolution setting affects the transmission speed and quality of faxed
90 Use the fax features