Chapter 12
To set the number of rings before answering from the control panel
1.Press Setup.
2.Press 4, and then press 3.
This selects Basic Fax Setup and then selects Rings to Answer.
3.Enter the appropriate number of rings by using the keypad, or press or to change the number of rings.
4.Press OK to accept the setting.
Cause: The HP
Solution: Set up the HP
For more information on setting up the HP
The HP All-in-One is not answering incoming fax calls
Cause: The HP
Solution: Look at the display on the HP
Cause: Auto Answer is turned off, which means that the HP
Solution: Depending on your office setup, you might be able to set the HP
If you must have Auto Answer off, you will need to press Start Fax Black or Start Fax Color to receive a fax.
TIP: If you are not close enough to the HP
Cause: You have a special ring pattern for your fax phone number (using a distinctive ring service through your telephone company), and the Distinctive Ring setting on the HP
196 Troubleshooting