NOTE: You can only change the resolution for faxes that you are sending in black and white. The HP
The following resolution settings are available for sending faxes: Fine, Very Fine, Photo, and Standard.
•Fine: provides
•Very Fine: provides the best quality fax when you are faxing documents with very fine detail. If you choose Very Fine, be aware that the faxing process takes longer to complete and you can only send
•Photo: provides the best quality fax when sending photographs in black and white. If you choose Photo, be aware that the faxing process takes longer to complete. When faxing photographs in black and white, HP recommends that you choose Photo.
•Standard: provides the fastest possible fax transmission with the lowest quality.
When you exit the Fax menu, this option returns to the default setting unless you set your changes as the default.
To change the resolution from the control panel
1.Load your originals print side up into the document feeder tray. If you are sending a
NOTE: If you are sending a
2.In the Fax area, press Menu.
The Enter Number prompt appears.
3.Enter the fax number by using the keypad, press Speed Dial or a
4.In the Fax area, press Menu repeatedly until Resolution appears.
5.Press to select a resolution setting, and then press OK.
6.Press Start Fax Black.
•If the device detects an original loaded in the automatic document feeder, the HP
•If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded on the glass, and then press 1 to select Yes.
Related topics
Set new default settings
Change the Lighter / Darker setting
You can change the contrast of a fax to be darker or lighter than the original. This feature is useful if you are faxing a document that is faded, washed out, or handwritten. You can darken the original by adjusting the contrast.
Send a fax | 91 |