Chapter 8
NOTE: The settings you specify here are only saved on the HP
Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo
For the best quality when copying a photo, load photo paper in the input tray and change your copy settings for the correct paper type and photo enhancement. You might also want to use the photo print cartridge for superior print quality. With the
To make a borderless copy of a photo from the control panel
1.Load 10 x 15 cm (4 x 6 inch) photo paper in the input tray.
2.Load your original photo print side down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass, as indicated by the engraved guides along the edge of the glass.
3.Press Start Copy Black or Start Copy Color.
The HP
NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab from the copy of your photo once the ink has completely dried.
TIP: If the output is not borderless set the paper type to Premium Photo, and then try making the copy again.
Related topics
•Load 10 x 15 cm (4 x 6 inch) photo paper
•Set the copy paper type
•Use a photo print cartridge
76 Use the copy features