3.Close the lid.
Fax transmission is slow
Cause: You are sending a fax in color.
Solution: Sending a fax in color can take longer than sending a
Cause: The document contains a lot of graphics or has very fine detail.
Solution: For faster transmission, use Standard resolution. This setting provides the fastest possible transmission with the lowest quality of fax. The default resolution is Fine, which can take longer to send.
To change the resolution from the control panel
1.Load your originals print side up into the document feeder tray. If you are sending a
NOTE: If you are sending a
2.In the Fax area, press Menu.
The Enter Number prompt appears.
3.Enter the fax number by using the keypad, press Speed Dial or a
4.In the Fax area, press Menu repeatedly until Resolution appears.
5.Press to select a resolution setting, and then press OK.
6.Press Start Fax Black.
•If the device detects an original loaded in the automatic document feeder, the HP
•If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded on the glass, and then press 1 to select Yes.
Cause: The phone line connection is noisy. Phone lines with poor sound quality (noise) can cause faxing problems.
Solution: If the failure was due to noise on the phone line, contact the sender to have them resend the fax. The quality might be better when you try again. You can check the sound quality of the phone line by plugging a phone into the telephone wall
Fax troubleshooting | 185 |