8 Use the copy features
The HP
TIP: For the best copy performance on standard copy projects, set the paper size to Letter or A4, the paper type to Plain Paper, and the copy quality to Fast.
This section contains the following topics:
•Make a copy
•Set the number of copies
•Set the copy paper size
•Set the copy paper type
•Change copy speed or quality
•Change default copy settings
•Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo
•Resize an original to fit onto letter or A4 paper
•Resize an original using custom settings
•Copy a
•Adjust the lightness and darkness of your copy
•Enhance blurred areas of your copy
•Enhance light areas of your copy
•Stop copying
Make a copy
You can make quality copies from the control panel. Load
To make a copy from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the document goes in first.
3.Do one of the following:
•Press Start Copy Black to initiate a
•Press Start Copy Color to initiate a color copy job.
NOTE: If you have a color original, pressing Start Copy Black produces a black-
Use the copy features | 73 |