Chapter 12
3.Dry the glass with a dry, soft,
4.Turn on the HP
To clean the lid backing
1.Turn off the HP
NOTE: Depending how long the HP
2.Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.
3.Dry the backing with a dry, soft,
CAUTION: Do not use
4.If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol.
CAUTION: Be careful not to spill alcohol on the glass or exterior of the HP All-
The printout is blank
Cause: The original is placed incorrectly on the glass or in the document feeder tray.
Solution: Load the original on the glass or in the document feeder tray.
•If you are loading your original on the glass, place it print side down on the right front corner as shown below. To copy a photo, position the photo so that the long edge of the photo is along the front edge of the glass.
228 Troubleshooting