3Com 3CRWX120695A, 3CRWX440095A From 802.1X Network Access, Access Rules Network Access Rules

Configure Employee Access Services 55

Table 9 Creating a Service for Employee Access (continued)

Task	Path	Primary Parameters to Configure
“Specify	Expand the AAA icon in the	1	From 802.1X Network Access
Network	Organizer panel; right-click		tab:
Access Rules” Network Access Rules >		„	User Glob: enter **
on page 64	Insert > 802.1X Network
	Access.	„	SSID: enter SSID name
		2	From 802.1X Policy tab:
		„	Select Enabled
		„	EAP type: Pass-Through
		„	Optionally for an offload
			configuration
			EAP type: PEAP, EAP Sub-Protocol:
			MSCHAPV2
			EAP certificate: install or generate
			by means of the CLI
		„	Click Choose Available:
			Select the RADIUS server group
		„	Click Finish
“Set Up	Expand the WX switch icon	1	From VLAN Setup tab:
VLANs on WX	in the Organizer panel,	„	VLAN ID: select number
Switches” on	right-click VLANs > Insert >
page 66	VLAN	„	VLAN Name: enter name
		„	IP Address: enter IP Address
		2	From VLAN Member Selection
			tab:
		„	Available Members: select port(s);
			click Add
		„	If the port is connected to an
			802.1Q trunk line, select the Tag
			checkbox and change the tag value
			(if necessary)
		„	Select PVST+ (if you wish to enable
			it)
		3	From Spanning Tree tab:
		„	Select STP options
		4	From Spanning Tree Port Setup
			tab:
		„	Select STP port options
		„	Click Finish