3Com 3CRWX120695A manual AutoTune feature to set MAP channels and power settings, Auto-Tuning on

4 USING RF AUTO-TUNING

Overview	RF Auto-Tuning is a technique you can use to configure your RF (radio)
	network. RF Auto-Tuning is a quick method that requires minimal
	configuration and no RF planning or site surveys, and instead, relies on
	the AutoTune feature to set MAP channels and power settings.
	This is a great way to quickly install a WX switch and MAPs, and observe
	how the network operates. The RF Auto-Tuning technique is best suited
	to networks containing fewer MAPs.
	To learn more about the benefits of RF Auto-Tuning, see “RF
	Auto-Tuning” on page 32.

To use this technique:

1Physically place your equipment (WX switches and MAPs) in their desired locations.

2Configure initial WX switch connectivity (configure IP addresses and install certificates).

3Upload the WX switch configuration into a 3WXM network plan.

4Create a service profile.

5Create a radio profile (or use the default radio profile).

6Map your service profile to your radio profile.

7Create your MAPs.

8Apply a radio profile to each radio on a MAP.

9Deploy your configuration.