3Com 3CRWX120695A, 3CRWX440095A manual Example Creating an ACL for SpectraLink Wireless Phones

Configure Voice over Wireless IP Service 85

Example: Creating an ACL for SpectraLink Wireless Phones

The following example illustrates how to define an ACL on a WX switch in an environment where SpectraLink® wireless phones are used.

To define an ACL on a WX switch and add ACEs:

1Expand the WX switch icon in the Organizer panel; right-click on ACLs > Insert > ACL. The Create ACL wizard is displayed.

2Enter the name for the ACL in the ACL Name field.

3Click New. Select New L4 Protocol ACE. Create an ACE that matches the SVP protocol (SpectraLink’s proprietary protocol).

„Select 7 for the CoS value to map the ACL to an elevated priority.

If Wi-Fi Multimedia (WMM) support is disabled, use 6 or 7 for SVP, and use 4 or 5 for other VoWIP types. When WMM is disabled, the MAP forwarding queue that maps to CoS values 6 and 7 is optimized for SVP. If WMM support is disabled, use 6 or 7 for all types of VoWIP.

„Select 119 for the Protocol ID value (representing the SVP protocol).

„Click Finish. The Create ACL wizard is displayed again.