3Com 3CRWX440095A, 3CRWX120695A, CRWXR10095A manual Modelling, Your network plan

5	USING RF AUTO-TUNING WITH
	MODELLING

Overview	RF Auto-Tuning with modelling is a technique you can use to configure
	and implement your network that builds on the RF Auto-Tuning method.
	You will, as the name implies, still use RF Auto-Tuning (auto tuning) to
	adjust power and channel settings to provide RF signals to the coverage
	area for your users. You’ll then enhance the auto tuning feature by
	providing modelling information about your geographic location.
	To use this technique, you will complete the tasks described in “Using RF
	Auto-Tuning” on page 91. Then, you’ll complete the following steps in
	your network plan:

1Add site information (buildings and floors) or import a floor drawing

2Add RF obstacles (optional)

3Add an RF coverage area

By providing some information about your buildings and floors, you add enough details into 3WXM so that you can better visualize your network topology and support improved monitoring at your site.

To learn more about the benefits of RF Auto-Tuning with modelling, see “RF Auto-Tuning with Modelling” on page 32.