3Com CRWXR10095A, 3CRWX440095A, 3CRWX120695A Using the RF Auto-Tuning with modelling technique

6 USING RF PLANNING

Overview	RF Planning is a technique you can use to import detailed information
	about your site into 3WXM, add RF obstacle information and third-party
	APs, and configure your RF coverage area at a finer level than is possible
	using the RF Auto-Tuning with modelling technique.
	By defining sites, buildings, and floors, you provide 3WXM with the
	necessary information to modularly manage large networks based on
	geographical or organizational boundaries. For example, a network plan
	can represent a campus-wide network. 3Com recommends that you limit
	a network plan to a single campus or Mobility Domain. A network plan is
	also limited to one country, since a network plan only supports one
	common country code for the WX switches contained in it.

To use the RF planning technique:

„Prepare your floor plan graphic files

„Add site information

„Add RF obstacles

„Add an RF coverage area

„Create a work order

„Install your equipment

„Deploy your configuration

To learn more about the benefits of RF Planning, see “RF Planning” on page 33.