80 CHAPTER 3: CONFIGURING WIRELESS SERVICES
“Specify
Network Access
Rules” on
page 64
Expand the AAA icon in the
Organizer panel; right-click Network
Access Rules > Insert > MAC
Network Access
1From MAC Network Access page:
Matching user Glob: enter **
SSID: enter SSID name
2From Authentication tab:
Select Choose Available > RADIUS or Local
Click Finish; then click Finish again
“Set Up VLANs
on WX
Switches” on
page 66
Expand the WX switch icon in the
Organizer panel, right-click VLANs
> Insert > VLAN
Note: 3Com recommends
completely isolating the VoWIP VLAN
as a best practice procedure in your
WLAN.
Setup VoWIP VLAN.
1From VLAN Setup tab:
VLAN ID: select number (must be unique)
VLAN Name: enter name (must be unique)
IP Address: enter IP Address
2From VLAN Member Selection tab:
VLAN Name: enter VLAN name for the VoWIP phones
Available Members: select port(s) to reach other ports
on the VoWIP VLAN or the VoWIP gateway/PBX; click
Add
3From Spanning Tree tab:
Select STP options
4From Spanning Tree Port Setup tab:
Select STP port options
5From VLAN IGMP tab:
Uncheck Enabled
Click Finish
“Configure
Access Control
Lists” on
page 84
Expand the WX switch icon in the
Organizer panel, right-click on ACLs
> Insert
1From ACL Setup tab:
Click New; select an ACE
Enter ACE set up information
Click Finish
2From ACL Map tab:
Map ACL to VoWIP VLAN
Click Finish
Table12 Creating a Service for VoWIP Access (continued)Task Path Primary Parameters to Configure