3Com 3CRWX440095A, 3CRWX120695A manual Creating a Service for VoWIP Access, From Encryption tab

78CHAPTER 3: CONFIGURING WIRELESS SERVICES

Task Table Table 12 contains the tasks you need to perform to create VoWIP access services. For a summary of configurable items, see “Step Summary” on page 81.

Table 12 Creating a Service for VoWIP Access

Task	Path	Primary Parameters to Configure
“Step Summary”	Expand the WX switch icon in the	1	From Service Profile tab:
on page 56	Organizer panel; right-click Service	„	SSID name: enter name
	Profiles > Insert > Service Profile
			SSID type: select Encrypted
		„
		„	Beacon: not selected (hide presence of SSID for
			marginally improved security)
		„	Fall Through Auth: None
		2	From Encryption tab:
		„	Security mode: select WEP or WPA/PSK (provides higher
			level of security)
		3	If you select WEP:
		„	802.1X Auth Enabled: select yes
		„	TKIP enabled: select no
		„	Click Finish
		4	If you select WPA/PSK (Must be supported by your
			VoWIP device):
		„	802.1X Auth Enabled: select no
		„	PSK Auth: select enabled
		„	Pre-shared Key: (64 Hex characters) or enter a pass
			phrase and click Generate Key
		„	TKIP enabled: select yes
		„	Click Finish
“Create a Radio	Expand the WX switch icon in the	1	From Radio Profile tab:
Profile” on	Organizer panel; right-click Radio	„	Radio profile name: enter a name
page 59	Profiles > Insert > Radio Profile
		2	From Service Profile tab:
		„	Select the VoWIP service profile in the Available Service
			Profiles list.
		„	Click Add; then click Finish