170 CHAPTER 8: OPTIMIZING A NETWORKPLAN
The following sections describe how to import RF measurements from
your network, or how to import RF measurements from an Ekahau site
survey.
Using RF Measurements from MAPs
You can apply the RF measurements derived from the MAPs in your
WLAN (which regularly monitors the RF environment) to your network
plan. The RF measurements are taken from MAP radios.
After you apply the RF measurements, the floor’s RF model (obstacles)
will be optimized with this data.
To import RF measurements:
1Access the Building wizard, if not already open.
2Click Optimize RF Coverage at the top of the wizard. The Optimize RF
Coverage page appears.
3Click Import Measurements. The Import RF Measurements wizard
appears.
4Select Network as the source of the measurements.