Agilent Technologies 1670G *TRG (Trigger)

Table 8-6 Status Byte Register
Bit Position Bit Weight Bit Name Condition
7 128 not used
6 64 MSS 0 = instrument has no reason for service
1 = instrument is requesting service
5 32 ESB 0 = no event status conditions have occurred
1 = an enabled event status condition has occurred
4 16 MAV 0 = no output messages are ready
1 = an output message is ready
3 8 LCL 0 = a remote-to-local transition has not occurred
1 = a remote-to-local transition has occurred
2 4 not used
1 2 not used
0 1 MSB 0 = a module or the system has activity to report
1 = no activity to report
0 = False = Low
1 = True = High
*TRG (Trigger)
Command *TRG
The *TRG command has the same effect as a Group Execute Trigger (GET):
it starts an intermodule group run. If the analyzer is not configured for a
group run, this command has no effect.
Example OUTPUT XXX;"*TRG"
Common Commands
*TRG (Trigger)
8–17