In This Book
This programmer’s guide contains general
information, instrument level commands,
logic analyzer commands, oscilloscope
module commands, pattern generator
module commands, and programming
examples for programming the Agilent
Technologies 1670G-series logic
analyzers. This guide focuses on how to
program the instrument over the GPIB
and the RS-232-C interfaces. For
information on using Ethernet refer to
the LAN section of your User’s Guide.
Instruments covered by the Agilent
Technologies 1670G-Series
Programmer’s Guide
The Agilent 1670G-series logic analyzers
are available with or without oscilloscope
measurement capabilities and pattern
generator capabilities. The Agilent
1670G-series logic analyzer has a hard
disk drive and optional Ethernet
capability.
What is in the Agilent Technologies
1670G-Series Programmer’s Guide?
The Agilent Technologies 1670G-Series
Programmer’s Guide is organized in six
parts.
Introduction to Programming the
Agilent Technologies 1670G
1
Programming Over GPIB
2
Programming Over RS-232-C
3
Programming and
Documentation Conventions
4
Message Communication
and System Functions
5
Status Reporting
6
Error Messages
7
Common Commands
8
Instrument Commands
9
Module Level Commands
10
SYSTem Subsystem
11
MMEMory Subsystem
12
WLISt Subsystem
14
SFORmat Subsystem
15
MACHine Subsystem
13
iii