<new_text> string of up to 8 alphanumeric characters
<state_terms> {A|B|C|D|E|F|G|I| RANGe1 | RANGe2 | TIMer1 | TIMer2}
Example OUTPUT XXX;":MACHIN E1:RENAME A,’DATA’ "
Query :MACHine{1|2}:RENAME? <res _id>
The REName query returns the current names for specified terms assigned
to the specified analyzer.
Returned Format [:MACHine{1|2}:RENAME] <res_id>,<new_text><NL>
Example OUTPUT XXX;":MACH INE1:RENAME? D"
RESource
Command :MACHine{1|2} :RESource {<re s_id>[,<res_ id >]...}
The RESource command allows you to assign resource terms A through G
and I, Range 1 and 2, and Timer 1 and 2 to a particular analyzer (machine 1
or 2).
In the timing analyzer only, two additional resource terms are available.
These terms are EDGE 1 and 2. These terms will always be assigned to the
the machine that is configured as the timing analyzer. In the State analyzer
only, two additional resource terms are available. These terms are H and J.
These terms cannot be assigned to a timing analyzer.
<res_id> {<state_terms>|H|J} for state analyzer or
{<state_terms>|EDGE{1|2}} for timing analyzer
<state_terms> {A|B|C|D|E|F|G|I|RANGe1| RANGe2 | TIMer1|TIMer2}
Example OUTPUT XXX;":MACHIN E1:RESOURCE A,C,RA NGE1"
MACHine Subsystem
RESource
13–9