Agilent Technologies 1670G manual LOGic

LOGic
Command :TRIGger:[MODE PATTern;PATH CHANnel<N>;] LOGic
{HIGH|LOW|DONTcare}
The LOGic command sets the logic for each trigger path in the PATTern
trigger mode. The choices are HIGH, LOW, and DONTcare. The trigger level
set by the LEVel command determines logic high and low threshold levels.
Any voltage higher than the edge trigger level is considered a logic high for
that trigger path; any voltage lower than the trigger level is considered a logic
low for that trigger path.
<N> {1|2}
Example OUTPUT XXX;":TRIG:PATH CHAN1;LOG HIGH "
Query :TRIGger:LOGic?
The LOGic query returns the current logic of the previously selected trigger
or path.
Returned Format [:TRIGger:LOGic ] {HIGH|LOW|DONTca re}<NL>
Example OUTPUT XXX;":TRIG:MODE PATT;PATH CHAN 1;LOG?"
TRIGger Subsystem
LOGic
35-10