SLISt
Selector :MACHine{1|2}:SLISt
The SLISt selector is used as part of a compound header to access those
settings normally found in the State Listing menu. It always follows the
MACHine selector because it selects a branch directly below the MACHine
level in the command tree.
Example OUTPUT XXX;":MACHIN E1:SLIST:LINE 256"
COLumn
Command :MACHine{1|2}:SLISt:COLumn

<col_num>[,<module_num>, MACHine{1|2}],

<label_name>,<base>

The COLumn command allows you to configure the state analyzer list display
by assigning a label name and base to one of the 61 vertical columns in the
menu. A column number of 1 refers to the leftmost column. When a label is
assigned to a column it replaces the original label in that column.
When the label name is "TAGS," the TAGS column is assumed and the next
parameter must specify RELative or ABSolute.
A label for tags must be assigned in order to use ABSolute or RELative state
tagging.
SLISt Subsystem
SLISt
17–7