Agilent Technologies 1670G {STARt|CENTer|END|POSTstore,<percent>}

TPOSition
Command MACHine{1|2}:SWAVeform:TPOSition
{STARt|CENTer|END|POSTstore,<percent>}
The TPOSition command controls where the trigger point is placed. The
trigger point can be placed at the start, center, end, or at a percentage of
poststore. The poststore option is the same as the User Defined option when
setting the trigger point from the front panel.
The TPOSition command is only available when the acquisition mode is set to
manual.
<percent> integer from 1 to 100
Example OUTPUT XXX;":MACH INE2:SWAVEFORM:T POSITION CENTER"
Query MACHine{1|2}:SWAVeform:TPOSition?
The TPOSition query returns the current trigger setting.
Returned Format [MACHine{1|2}:SWAVeform:TPOSition]
{STARt|CENTer|END|POSTstore,
<percent>}<NL>
Example OUTPUT XXX;":MACHIN E2:SWAVEFORM:TPO Sition?"
SWAVeform Subsystem
TPOSition
18–11